This is a really unique poster detailing the price of each part of a firearm issued to men in the American Civil War. It measures 20 inches by 24 inches and was printed by the Adjutant General’s Office led by Lorenzo Thomas. It was likely provided to the regimental quartermasters in charge of accounting for ordnance stores.
There are 16 tables printed on this Civil War poster representing uniforms, garrison equipment, weapons and more. I think it likely served a couple purposes. The most obvious use was a quick reference guide to the prices of equipment to deduct from officer’s payrolls due to unaccountable losses. Most of these tables are also printed in the document, Instructions for Making Quarterly Returns of Ordnance and Ordnance Stores: As Prescribed by the General Regulations of the Army; Including Directions Respecting The Evidence Required In Settling The Ordnance Property Accounts Of Officers Leaving The Service. Prepared At The Ordnance Bureau, For The Use Of Officers Accountable For Such Property.
This is a really early underhammer pinfire pistol made in 1849 by the French gunsmith, Joseph-Célestin Dumonthier who lived in Houdan, Seine-et-Oise, France. It follows his 2 July 1849 French patent.
The whole barrel unscrews from the frame and allows you to load a single 12mm pinfire cartridge.
The Lefaucheux model 1859 carbine was a small carbine Eugène Lefaucheux made with hopes to gain military acceptance. It is a very simple design with few moving parts. It only weighs 4.5 pounds and has an overall length of 3 feet 4 inches.
There are multiple variations of this gun; some with a full metal frame, some with an automatic cartridge extractor, a percussion cap version, a double barrel version, pistols, and various bores.
This example is chambered for 12mm pinfire cartridges, has a manual extractor and a solid wood stock.
There are two levers on the gun. The one on the right is the cocking lever and also serves as the breechblock. When you raise it it opens the breech, allowing you to insert a new pinfire cartridge or remove a spent cartridge. It also cocks the extra-long hammer. The following video and image shows how this works.
Here is a selection of factory drawings/blueprints for how Eley Bros made pinfire cartridges. These blueprints date to the early 1900s.
First up is the 5mm pinfire cartridge drawing. There is a lot going on here! It lists the dimensions for the bullet, the pin, the percussion cap and the case. They also give all of the dimensions in imperial units though these cartridges were always sold by their metric designation, “5mm.”
The bullet is described of being made of 98% lead and 2% antimony. The antimony was an additive used to harden the alloy. It was a hollow bullet with an overall diameter of .207 inches, or 5.258 millimeters. It had an overall height of .300 inches or 7.62 millimeters. The bullet weight is 18 grains and the powder charge is listed as “about 1.5 grains.”
This matches up closely with examples in my collection which have a bullet weight of 18.0 grains and a powder charge of 2 grains. The overall weight is 35.2 grains.
The brass case is listed to have a mixture of 70% copper and 30% zinc to make up the alloy they used. The case had an overall length of .450 inches or 11.43 millimeters. They give the exact specifications of where to put the hole for the brass pin and even what angle the pin should be placed in the cartridge to ensure the hammers get the best hit.
There have been many articles written about Jean Samuel Pauly and his contribution to the history of firearms development. One excellent source recently looks in detail at the patents by Pauly, Roux, Picherau and Lefaucheux. You can read about it here:
Priestel dives deep into the modifications by Pauly and the successors to Pauly’s company, but there are a few other improvements to the Pauly system by other prominent gunmakers of the day that are not addressed in this publication. A couple of these were mentioned in a French gun magazine’s article in the 1970s, but other than the brief mention there, there is nothing I could find published that goes into detail on the following improvements to the Pauly gun and cartridges.
So I gathered the patents, transcribed them and will detail the improvements here!
Jacques-Joseph Plomdeur | 1825-03-31
Jacques-Joseph Plomdeur was a well known gunmaker who had a business at 25 rue des Fossés-Montmartre and later at 5 bis, rue du Faubourg-Poissonnière. He was best known for his improvements to primers and percussion caps which he held a few patents on. In the 1830s he took out many advertisements for his improvements to guns and primers such as the following:
On 31 Mar 1825, Plomdeur took out a French patent for 5 years for an improvement on Pauly guns.
There are two main areas that he addresses. First is how the hammer is connected to the plate, passing all the way through, which allowed for considerable fouling throughout the inside.
Note to visitors linked from Forgotten Weapons, and everyone else too:
Much of the information in Ian’s video came from this book, but its central argument that Pauly only produced fire piston type guns is incorrect. Pauly absolutely created and patented a percussion-firing system. I have recently acquired the complete set of French military reports and memos from his 1812 to 1814 trials, and they make this beyond dispute. The book also relies on faulty translations and misinterprets evidence. For example, the firearms shown on pages 24 and 25 are cited as fire piston examples, but I have examined images of their internal mechanisms and can confirm they are percussion arms.
After Pauly moved to the UK in 1814, he did patent and produce fire piston versions of his design, likely as a way to work around Forsyth’s overly broad patent on percussion ignition systems in Britain.
For those asking about access to the book, PDF copies are available in two places:
- In the Jean Samuel Pauly archives at the Lefaucheux Museum (Pauly’s company was later acquired by Lefaucheux), available to supporting members.
- In the International Ammunition Association’s Resource Center, also accessible to members.
For the most accurate and updated research on Pauly, follow this blog (sign up with your email to the right) and the Lefaucheux Museum. I will also be publishing a detailed monograph to accompany a forthcoming ASAC presentation and display.
This book is an important source examining the company of Jean Samuel Pauly and his successors. It collects and analyzes many of the earliest documents and patents surrounding this revolutionary step in firearms design, making it one of the few substantial modern works devoted to the subject.
However, readers should be aware that while the book is deeply detailed, many of its conclusions are now known to be incorrect. Chief among these is the author’s claim that Pauly only produced fire piston–type arms. Extensive archival material from Pauly’s 1811–1813 French military trials demonstrates that he in fact created and patented a percussion-firing system, and even some of the firearms illustrated in the book (such as those on pp. 24–25) are percussion rather than fire piston examples. The book also suffers from mistranslations and other interpretive errors, though it nonetheless remains valuable for the breadth of contemporary documentation it reproduces and its attempt to synthesize earlier scattered sources.
James Erskine, a gunmaker and inventor from Newton Stewart, Scotland had a prolific career inventing and patenting many improvements to guns and cartridge loading machines. His patented cartridge filler was universally accepted and used by all of the great British gunmakers of the day!
Erskine was born on September 12, 1812, in Penninghame, Wigtownshire, Scotland, the son of Mary Watson and Thomas Erskine. He married Elizabeth Sinclair on December 4, 1854, in his hometown. They had eight children over 21 years. He died on November 20, 1891, in Newton Stewart, Wigtownshire, Scotland, having lived a long life of 79 years.
During most of those 79 years Erskine was active learning and then working in the gun trade. The IGC Historical Database indicates that Erskine began his apprenticeship at 14 years old, working as a gun finisher for Williams & Powell, or their predecessor, Edward Patrick in Liverpool.
Sometime after 1841 and before the 1851 Scotland Census, Erskine moved to Newton Stewart and began working for himself as a gun maker.
He displayed two guns at the 1851 Great Exhibition and was awarded a bronze metal.
On July 20, 1859 he delivered the following provisional specification to the British patent office for an update to the Lefaucheux-style pinfire shotgun:
Description des Machines et Procédés spécifiés dans les Description des machines et procédés spécifiés dans les brevets d’invention, de perfectionnement et d’importation, dont la durée est expirée was the official printed record of the patents granted in France that were issued under the 1791 patent laws. These patents were not printed until after their expiration date of either 5, 10 or 15 years from when they were issued.
From 1791 until 1844 it was incredibly expensive to get a patent issued. The patent tax for 5 years was 300 francs, for 10 years it was 800 francs and for 15 years it was 1500 francs. At the time the average worker’s daily wage was 1.5 francs.
This feels like a very high quality book with thick linen rag pages, gilded pages and marbled inside covers. It even came with a bookmark!
But the content inside the document is what is really important. This is the official record of what the Conservatoire royal des arts et métiers (i.e. the patent office) believed the patent was about, looking back after it expired. This document is not always a full transcription of the patentee’s original document but rather detailed abstract that specifically describes the patent and heavily focuses on describing the drawings that accompanied it. It does quote specific sections sometimes though, Additionally, all of the drawing in the original patent may not always be reprinted here.
August G. Genez was a French Gunsmith that began working in the gun-making industry at 13 years old in France. He died on June 17, 1897 and over the course of his career he had many successful ventures as well as challenging tragedies.
This article will take a look at A. G. Genez, the gunsmith in New York, New York, and follow his 50-year career in the gun industry. We will also take a look at his successors of his gun shop, Vincent Bissig and John P. Dannefelser.
When August Genez was 21 years old he immigrated to the United States from a port in Le Havre, France on a ship named Charles Thompson and arrived in New York, New York on April 10, 1854. The ship log of his emigration record states he was from Germany but his naturalization record, son’s wedding record, various ads of his, son’s various census records all state his birthplace was France.
The Genez name first shows up in the 1856/1857 issue of Trow’s New York City Directory where Genez August is listed as a gunsmith at 221 William. The same year the Wilson’s business directory of New-York City list him under the Gunsmiths section with his business at 221 William.
L’Ecole du chasseur is an early book with reviews and information on birding, fishing, and hunting. They devote around 60 pages to print an extract of Henri Roux’s publication, Fusils De Chasse, Et Principalement Des Fusils a Pistons De L’invention Pauly, Avec Quelques Observations Sur La Fabrication Des Armes a Feu, Sur La Chasse, Sur La Poudre Et Ses Effets, a book all about the benefits of the new Pauly rifle and pistol, a system which Henri Roux owned the patents and company for.
Roux also created a detailed drawing which is referenced in both of these books throughout the text.
As a reminder, The Ironmonger & Metal Trades Advertiser was a British trade journal whose purpose (according to the publisher) was “concerned with helping people to make a living.” It is full of articles and exposition reviews and trade news and advertisements related to Ironmongers, which would be similar to modern-day hardware stores. I have began a series of publishing some of the guns and ammunition related features and ads from these historic journals that have largely been lost to history and are not published anywhere else.
This post will focus on the contents in the July-September 1901 Issues. The August 31, 1901 weekly issue had a nice two-page section on Guns and Ammunition. I will transcribe these articles here!
A Top-lever Hammerless-gun.
Following a well-established custom, Robert Hughes & Son, of the Universal Firearms Works, Moland Street, Birmingham, have issued an abridged list of their productions illustrating the leading lines in sporting-guns which they are this season offering to the trade. The list embraces some two dozen weapons, ranging from a simple farmers’ gun listing at 4l. 4s., up to the highest class of Anson & Deeley ejecting hammerless-gun retailing for about 50l. One of the best selling lines is the No. 4,4640, illustrated in fig. 1. This is a top-lever hammerless-gun, with cross-bolt action, and either plain damascus or steel barrels.
It is fitted with many modern improvements and is nicely finished in every detail. It retails at about 11l. Another popular line is the “Gentleman’s” gun, No. 4,456. This is a good-looking and well-finished weapon, with nicely-figured damascus barrels and figured stock, and it lists at 7l. to 8l. 10s.
The last issue in September of The Ironmonger and Metal Trades Advertiser was often the most important issue of the year. It was the biggest and contained the most ads. This issue each year also had this fancy colored cover.
This September 26, 1896 issue of The Ironmonger lists Arms and Ammunition trade marks, brands or special names for the following companies:
Lane Bros., Ammunition for Air Guns
Hay, Merricks & Co., Limited, Gunpowder
F. Joyce & Co. Ltd., Manufacturers of Sporting Ammunition; Percussion Caps, Cartridges and Gun Wads
Eley Bros., Lim., Sporting, Military, and Revolver Cartridges, Percussion Caps and Gunwads
G. Kynoch & Co. Limited, Sporting and Military Ammunition
The King’s Norton Metal Co., Limited, Rolled Metals, Ammunition for Small Arms, Quick Firing and other Guns
The Ironmonger & Metal Trades Advertiser was the first trade newspaper. It was first published as Morgan’s Monthly Circular & Metal Trades Advertiser on May 31, 1859 and soon changed its name to The Ironmonger & Metal Trades Advertiser.
It began as a monthly journal and by 1878 it was switched to being published weekly, every Saturday. They also published the yearly volumes capturing the 52 weekly issues in 2-4 large volumes per year. I recently acquired a set of these yearly volumes that cover the years of 1879 – 1903.
There is a wealth of information in these related to the hardware and metal trade across the United Kingdom. They had weekly stock performance, tabulated results on UK exports to the US, foreign news and intelligence, reviews of agricultural shows and other exhibitions, articles about guns and ammunition, listing of patents and trademarks applied for, information on liquidations and bankruptcies and advertisements; many many advertisements.
We have examined this cartridge previously in our exploration of the relationship of pinfire cartridges and The United States. You can read about it here:
The August, 31 1861 issue of The Scientific American reviewed this new cartridge and gun made by Casper D. Schubarth in detail. I found an original copy and transcribed it here to preserve for the future.
The story of Coirier à Clermont is a interweaved tale of partnerships and encounters that begins in 1848.
In 1848 a Frenchman named Francis Marquis founded a company that made carbines for cavalry. In French this is the term, harquebusier. He was known for making high quality guns and displayed some of his work at the Exposition Universelle of 1855 in Paris, the 1862 Great London Exposition and the 1867 Paris Universal Exposition.
Shortly after the London Exposition, La Chasse Illustrée, an illustrated journal dedicated to all things hunting, featured an article about some of the high grade guns presented at the exposition. They described Marquis’s gun as “remarkable” and “a real masterpiece.”
À PROPOS DE MOI
Bonjour, je m'appelle Aaron Newcomer. Je suis collectionneur et chercheur sur les systèmes d'armes à feu à chargement par la culasse du début du 19e siècle, avec un intérêt particulier pour les travaux de Jean Samuel Pauly et Casimir Lefaucheux. Je collectionne les cartouches et les documents liés à ces types d'armes à feu et je mène des recherches sur ces sujets, approfondissant ma compréhension et ma connaissance de ces armes historiques et leur place dans l'évolution de la technologie des armes à feu. Ma collection et mes recherches reflètent mon engagement à préserver et à comprendre l'histoire et les innovations techniques de ces systèmes d'armes à feu anciens.
Pour en savoir plus sur moi et où mes travaux ont été publiés.
