John H. Hall was a US gunsmith that invented a hybrid breechloading and muzzleloading rifle adopted by the US Army in 1819. But that’s not who we will be talking about. The John Hall we will be talking about was an auto mechanic. He lived in the small town of Wigton, Cumberland (present day Cumbria), in northwest England. Wigton had a population of 4000 people and was designated as a market town which gave it the legal right to hold a weekly market. In the late 1800s and early 1900s there were a lot of agricultural activities in the surrounding area including notable berry farms, livestock farms and many other types of farms.

John Hall owned a company called Station Road Works which was located on Station Road and very likely was the building that is the current Station Road Garage.

Hall was officially appointed by the Automobile Club of Great Britain and Ireland and the Motor Union of Great Britain and Ireland as an automobile repairer for the Wigton area and listed in their Automobile Handbook. He referred to himself as an engineer and was likely a machinist that could fabricate parts needed to repair automobiles.

On April 2nd in the year 1902, Hall applied for a British patent for “Improvements in Apparatus for Scaring Purposes, Especially Applicable for Scaring Birds.” This application for his clock gun mentions existing similar devices that used a clock and had hands attached to levers that would release weights. He mentioned that these devices were very expensive and prone to wear over time. He also mention the dangers of how each barrel was loaded at the muzzle and detonated by a cap and that sometimes people would steal or mess with the powder since everything was loaded from the outside.

This self-acting, field clock gun was patented in England by William Maund and Charles Millichamp on May 3, 1888. It is essentially a giant revolver that holds eight 16 gauge pinfire shotshells. The clockwork mechanism inside it can be set to fire the cartridges intermittently at intervals of as often as every 15 minutes up to every 1.5 hours. It can also be set to fire a single shot at a chosen time.

It was sold in two variations. One option had a handle on the top allowing it to be suspended from a tree or a barn. This is the example that I have and is shown in the pictures. There was also a variation that was sold at a 25% premium with a figurine of a person holding a gun as shown in the advertisement above and patent image below.

In this article we will look at a few American companies who loaded pinfire cartridges. Von Lengerke & Detmold was a well-respected New York dealer of fine European-made sporting guns and fishing tackle. They were founded in 1882 and were sold to Abercrombie & Fitch in 1928. They had these pinfire shells custom made by Kynoch & Co. of Birmingham, United Kingdom, and then loaded them in the United States. They also sold their custom shells as new-primed empties

The firm of A. G. Genez was a manufacturer of high quality double barrel shotguns. They also made conversions on guns from earlier types of detonation forms, such as pinfire or percussion, to newer formats, such as centerfire. They also loaded and sold shotshells for their manufactured or converted breech-loading shotguns. The company was established by August G. Genez and spent most of its history at 9 Chambers Street. Genez operated there until November of 1880 when it was advertised as succeeded by Vincent Bissig.

A much more detailed article on A. G. Genez can be found here:

Over the past few posts our exploration of the relationship between pinfire cartridges and the United States has taken a look at the cartridges used in the American Civil War and we have taken a look at some of the uncommon pinfire cartridges that never made it into mass production. In this article we will look at the most prevalent American manufacturer of pinfire cartridges, Union Metallic Cartridge Company (UMC) of Bridgeport, Connecticut.

There are many articles and books about UMC that go into great detail about the beginnings and history of the company so we will only glance at history that pertains to their production of pinfire cartridges.

The last few posts of our exploration of the relationship between pinfire cartridges and the United States has focused on their use in the American Civil War. In this article we will take a look at some lesser known pinfire cartridges that played their part in the constantly evolving history of ammunition in the United States. First up is the .58 Schubarth.

The .58 Schubarth.

The .58 Schubarth was patented and made in 1861 by Casper D. Schubarth who resided at 6 North Main Street, Providence, RI. 

The whole idea of the cartridge and rifle is based on a modification and improvement of Gallager & Gladding’s cartridge and rifle that was created a couple years prior. It is an inside-primed pinfire that was made to be easily reloadable with the common Minié bullets and percussion caps. Schubarth’s improvement also made it gas-tight and waterproof by dipping the cartridge in melted tallow after inserting the bullet. The design also called for a small cork wad to be placed between the bullet and the powder to clean the barrel on each shot.

In Schubarth’s interview with The Scientific American he described a rimfire variation of this cartridge by stating that “for army use a ridge may be formed entirely around the cartridge and filled with fulminating powder, in place of the wire, and cap, so that the cartridge may be inserted in any position. But for sporting it is more economical to adopt the arrangement represented, as the same case may be refilled and used many times.”

While I do not have ballistic information on the cartridge, in 1861 Schubarth said that “the powder is fired in the middle of the charge thus causing a rapid combustion […] that causes so great force be generated that 60 grains of powder has driven a bullet through 15 one-inch boards at a distance of one hundred yards” so it sounds like a fairly powerful cartridge!

You can see and read this whole Scientific American article here:

The example in my collection was once owned by the well-known author and ammunition researcher, Colonel Berkeley R. Lewis of the United States Army Ordnance Corps. He acquired it from the Smithsonian Institution.

Over the past few posts we have taken a look at the three American companies that manufactured pinfire cartridges for use in the American Civil War. Between Allen & Wheelock, Christian Sharps and C.D. Leet they manufactured a total of 1,572,000 pinfire cartridges. 

However there is no known documentation on which manufacturers we imported additional cartridges from. We know that the Union Army purchased at least 200,000 cartridges with the large order of Lefaucheux revolvers from France. We know some of the smaller purchases also came with cartridges. We also know that the Confederate States Army had pinfire cartridges stored in their arsenals and used pinfire revolvers.

So I figured the only way to answer this question was to acquire the actual cartridges they used. And that is exactly what this article is going to focus on.

On August 13, 1864 an arsenal inspection of the Selma Arsenal showed that the Confederate States Army had 52,800 pinfire cartridges in stock. Various inspection reports also list cartridges in Union arsenals as well as pinfire revolvers in use by various Union and Confederate units.

Our exploration of the relationship between pinfire cartridges and the United States continues with a look at Allen & Wheelock and Ethan Allen & Co.

Ethan Allen was in the firearms and cartridge industry for nearly 40 years beginning in 1832. Many other articles and books cover his business relationships in much more detail than I will go into. This article will only take a look at the time periods where he was making pinfire cartridges. 

In the early 1860s Ethan Allen filed for a patent on what would become known as his lipfire cartridge. His patent was initially denied because examiner thought they were too similar to the pinfire cartridges; specifically, the ones described in Eugene Lefaucheux’s 1854 revolver patent filed in England by patent attorney John Henry Johnson. Allen responded that the pinfire cartridge was well-known in the United States and that his lipfire cartridge was an improvement in many ways such as being gastight, waterproof, and less dangerous. He mentioned the dangers of unintentional detonations of pinfire cartridges when dropping them. The patent office agreed with his remarks and noted that other than the fact that they were both cartridges there were practically no other similarities. Even though Allen believed his lipfire cartridges were superior to pinfire cartridges he realized that there was still money to be made from them.

In our continuing saga of the relationship between pinfire cartridges and the United States, this post will take a look at C. D. Leet & Company.

Last post we talked about Christian Sharps and their problems with being able to fulfill their pinfire cartridge contract. Because of the delays, the Frankford Arsenal received permission on February 20, 1862 to buy 200,000 pinfire cartridges with the higher powder quantity “equal to those of Colts army revolvers” from a different manufacturer. So on February 28th, Captain Crispin contacted C. D. Leet to order 250,000 pinfire cartridges. This was actually the very first order, for any kind of cartridge, that C. D. Leet received from the Army.

C. D. Leet delivered the first 50,000 cartridges on April 14th and received a payment of $856.25 for them on April 30th. They deliver another 88,000 in the beginning of May and the rest of the first order on May 16th. On May 3rd, 200,000 more were ordered which were all delivered on June 17th. The final order of pinfire cartridges from any manufacturer was Dec 10, 1863 for 76,000 from C. D. Leet which were delivered on December 30th.

C. D. Leet was the only manufacturer who seemed to have had no quality issues with the cartridges they delivered. You will notice that the design of the cartridge is a little different than Christian Sharp’s version. Leet’s cartridge contains a lead plate at the base of the case rather than having the case itself be reinforced. The next manufacturer we will look at uses the same technique as well. This had to have been easier and more efficient than Sharp’s method and is probably why there were much less issues manufacturing them to an acceptable standard.

For the next few posts we will take a detailed look at the relationship between pinfire cartridges and The United States. We will start with Christian Sharps.

In the late 1850s the United States Ordnance Department began testing many different weapons systems with the goal of modernizing its aging technology. They had received many favorable reports of European armies adopting the pinfire system so in 1857 and 1858 a few tests were performed on various calibers of pinfire revolvers, all of which received very favorable reviews. 

September 28, 1861 marked the entrance of pinfire arms in the American Civil War. On this date 52 Lefaucheux revolvers with ammunition were purchased from a New York gun dealer, Hermann Boker & Co. A month later the Army’s purchasing agent, Colonel George Lee Schuyler, purchased 10,000 Lefaucheux Model 1854 revolvers directly from Eugene Lefaucheux’s company in France. Another 2281 revolvers were acquired through small purchases from various military suppliers. Colonel Schuyler also brought back at least 200,000 pinfire cartridges.

Full box of 16g that I plan on loading and shooting

A nice 16g boxwood hand roll turnover tool for pinfire cartridges

A leather holder for 10 16g pinfire shotshells

This is a 10g pinfire shotgun that was manufactured in Liège, Belgium by the luxury gun maker, E. Bernard. It was retailed by Brun-Latrige of Saint-Étienne, France.

I had the opportunity to photograph some of my friend’s collection of early needlefire cartridges.

Here are some examples that were made for the Chassepot rifle. The collection contains specimens with explosive tips, armor piercing bullets, blanks, and ball rounds with both paper and linen cases.